Deutz-Fahr Agrotron TTV

Coolant capacity & service interval

Deutz-Fahr Agrotron TTV uses coolant with a capacity range of 18 to 36 liters. Service intervals include checking at 10 hours and changing at 1000 hours/24 months or 2400 hours. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
TTV 410, Stage 3A (2011-2015)
  • Use: Normal
  • Capacity 18 liter
TTV 420, Stage 3A (2011-2015)
  • Use: Normal
  • Capacity 18 liter
TTV 430, Stage 3A (2011-2015)
  • Use: Normal
  • Capacity 18 liter
TTV 610, Stage 3A (2009-2012)
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months
TTV 620, Stage 3A (2009-2012)
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months
TTV 630, Stage 3A (2009-2012)
  • Use: Normal
  • Capacity 36 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months
1130 TTV (2002-2008)
  • Use: Normal
  • Capacity 21 liter
  • Change 2400 hours
1145 TTV (2002-2008)
  • Use: Normal
  • Capacity 21 liter
  • Change 2400 hours
1160 TTV (2002-2008)
  • Use: Normal
  • Capacity 21 liter
  • Change 2400 hours

Additional Notes

  • The 1130 TTV, 1145 TTV, and 1160 TTV share an identical cooling system capacity of 21 liters, with a change interval of 2400 hours under normal use conditions.
  • A 2400-hour coolant change interval is notably long by agricultural machinery standards, reflecting the extended service cycles typical of heavy-duty tractor cooling systems designed for professional field use.
  • The Deutz-Fahr Agrotron TTV 410, TTV 420, and TTV 430 in Stage 3A configuration each carry an 18-liter cooling system capacity, which is 3 liters less than the 21-liter figure seen in the earlier 1130-1160 TTV series.
  • No coolant change interval is listed for the Stage 3A TTV 410, TTV 420, or TTV 430 models, in contrast to the interval data present for other configurations in the same lineup.
  • The TTV 610 and TTV 620 in Stage 3A configuration share a 21-liter cooling system capacity, a 10-hour check interval, and a change interval of 1000 hours or 24 months, whichever comes first.
  • The dual-condition change interval of 1000 hours or 24 months on the TTV 610 and TTV 620 means the calendar limit can trigger a coolant change before the hour threshold is reached, which is relevant for machines used infrequently across a season.
  • The TTV 630 Stage 3A stands out with a 36-liter cooling system capacity, significantly larger than any other configuration in the Agrotron TTV range covered here, and shares the same 10-hour check and 1000-hour/24-month change interval as the TTV 610 and TTV 620.
  • A 10-hour check interval on the TTV 610, TTV 620, and TTV 630 Stage 3A models indicates a frequent visual or level inspection routine, separate from the full coolant change schedule, which is common practice during initial machine break-in or high-load operating periods.

Other Systems