Deutz-Fahr Agrokid

Power steering fluid capacity & service interval

Deutz-Fahr Agrokid power steering fluid capacity is 21 liters. Service intervals include checking at 300 or 400 hours and changing at 1200 hours or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Agrokid 30 (2003-2004)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 21 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Agrokid 40 (2003-2004)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 21 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Agrokid 50 (2003-2004)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 21 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Agrokid 4.35 (1996-2004)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 21 liter
  • Check 400 hours
  • Change 1200 hours
  • Code: 12/12

Additional Notes

  • The Deutz-Fahr Agrokid power steering fluid specification is shared within a combined transaxle, hydraulic system, and power steering circuit, meaning the 21-liter capacity figure reflects the total volume of that unified system rather than a standalone power steering reservoir.
  • All four Agrokid configurations carry an identical 21-liter fluid capacity, covering the Agrokid 30, 4.35, 40, and 50 variants across the 1996-2004 model range.
  • The Agrokid 4.35 (1996-2004) specifies a check interval of 400 hours under normal use conditions, which is longer than the 300-hour check interval listed for the Agrokid 30, 40, and 50.
  • The Agrokid 30, 40, and 50 each carry a dual-condition change interval of 1200 hours or 12 months under normal use, meaning whichever threshold is reached first would govern the service event.
  • The Agrokid 4.35 lists only a 1200-hour change interval with no accompanying calendar-based limit, unlike the 2003-2004 models that pair the hour threshold with a 12-month maximum.
  • A 1200-hour change interval on a compact utility tractor used in typical agricultural operation represents a substantial service period, reflecting the relatively low annual hours many machines of this class accumulate.
  • The 300-hour check interval on the Agrokid 30, 40, and 50 serves as a fluid condition and level verification point well before the 1200-hour full change, allowing early detection of contamination or loss within the shared hydraulic circuit.

Other Systems