Deutz-Fahr Agrokid COM3

Differential fluid capacity & service interval

Deutz-Fahr Agrokid COM3 uses differential fluid with a capacity of 4,8 liters. Service intervals include checking every 300 hours and changing every 1200 hours or 24 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Agrokid 210, ->20001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 4,8 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • Agrokid 210, ->ZKDAK00200MD30001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 4,8 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • Agrokid 220, ->ZKDS2102V0MD20001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 4,8 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • Agrokid 220, ->ZKDS2902V0MD20001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 4,8 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • Agrokid 220, ->ZKDAK10200MD30001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 4,8 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • Agrokid 220, ->ZKDAK90200MD30001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 4,8 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • Agrokid 230, ->ZKDS2202V0MD20001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 4,8 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • Agrokid 230, ->ZKDS3002V0MD20001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 4,8 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • Agrokid 230, ->ZKDAK20200MD30001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 4,8 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • Agrokid 230, ->ZKDAL00200MD30001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 4,8 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The Deutz-Fahr Agrokid COM3 front differential holds 4.8 liters across all listed variants of the Agrokid 210, 220, and 230, covering every serial number range within the 2010-2015 production window. A consistent capacity across multiple sub-models typically reflects a shared axle assembly rather than model-specific hardware.
  • The 4.8-liter figure represents a service fill capacity, meaning the volume required when refilling a drained but otherwise intact differential. Overhaul fills, which account for fluid retained in passages and components during disassembly, can differ from service fill values.
  • A fluid level check is specified at every 300-hour interval under normal use conditions. Periodic checks at this frequency allow detection of leaks or consumption before a full drain-and-fill service becomes necessary.
  • The full fluid change interval is set at 1,200 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger structure means calendar time governs the change on machines with low annual operating hours, while hour accumulation governs on more heavily used equipment.
  • All ten listed configurations share identical service intervals and capacity values, spanning both the Agrokid 210, 220, and 230 variants across their respective serial number breaks. The absence of variation across sub-models and serial ranges points to a uniform front differential specification throughout the COM3 lineup for 2010-2015.

Other Systems