Claas Talos

Coolant capacity & service interval

Claas Talos coolant capacity ranges from 9 to 10,8 liters. Service intervals require changes every 1000 hours or 12 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Talos 210, Stage IIIA (2016-2022)
  • Use: Normal
  • Capacity 10,5 liter
  • Change 1000 hours/ 12 months
Talos 220, Stage IIIA (2016-2022)
  • Use: Normal
  • Capacity 10,5 liter
  • Change 1000 hours/ 12 months
Talos 230, Stage IIIA (2016-2022)
  • Use: Normal
  • Capacity 10,5 liter
  • Change 1000 hours/ 12 months
Talos 240, Stage IIIA (2016-2022)
  • Use: Normal
  • Capacity 10,5 liter
  • Change 1000 hours/ 12 months
Talos 120, Stage IIIA (2012-2016)
  • Use: Normal
  • Capacity 9 liter
Talos 130, Stage IIIA (2012-2016)
  • Use: Normal
  • Capacity 10,8 liter
Talos 210, Stage IIIA (2011-2016)
  • Use: Normal
  • Capacity 10,5 liter
Talos 220, Stage IIIA (2011-2016)
  • Use: Normal
  • Capacity 10,5 liter
Talos 230, Stage IIIA (2011-2016)
  • Use: Normal
  • Capacity 10,5 liter
Talos 240, Stage IIIA (2011-2016)
  • Use: Normal
  • Capacity 10,5 liter

Additional Notes

  • The Claas Talos 120 Stage IIIA carries a cooling system capacity of 9 liters, the smallest figure across all Talos variants listed, reflecting the lower-output engine in the 120 series relative to the higher-numbered models.
  • The Talos 130 Stage IIIA holds 10.8 liters of coolant, the largest capacity among all listed variants, despite sitting only one step above the 120 in the model range.
  • The Talos 210, 220, 230, and 240 Stage IIIA models all share an identical cooling system capacity of 10.5 liters, indicating a common engine cooling architecture across the upper portion of the Talos lineup.
  • For the Talos 210, 220, 230, and 240 Stage IIIA in the 2016-2022 production span, a coolant change interval of 1,000 operating hours or 12 months is specified, whichever comes first under normal use conditions.
  • The dual-trigger interval structure of 1,000 hours or 12 months means that calendar time alone can require a coolant change even when the machine has accumulated relatively few operating hours, as is common in seasonal agricultural equipment use.
  • The 2011-2016 entries for the Talos 210, 220, 230, and 240 Stage IIIA list only a capacity figure with no associated change interval, while the 2016-2022 entries for the same models include both capacity and a defined service interval.

Other Systems