Claas Talos

Automatic transmission fluid capacity & service interval

Claas Talos automatic transmission fluid capacity ranges from 47 to 55 liters. The service interval for fluid changes is 600 hours. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Talos 210, Stage IIIA (2016-2022)
  • Hydraulic system
  • Use: Normal
  • Capacity 55 liter
  • Change 600 hours
  • Talos 220, Stage IIIA (2016-2022)
  • Hydraulic system
  • Use: Normal
  • Capacity 55 liter
  • Change 600 hours
  • Talos 230, Stage IIIA (2016-2022)
  • Hydraulic system
  • Use: Normal
  • Capacity 55 liter
  • Change 600 hours
  • Talos 240, Stage IIIA (2016-2022)
  • Hydraulic system
  • Use: Normal
  • Capacity 55 liter
  • Change 600 hours
  • Talos 120, Stage IIIA (2012-2016)
  • Hydraulic system
  • Use: Normal
  • Capacity 47 liter
  • Talos 130, Stage IIIA (2012-2016)
  • Hydraulic system
  • Use: Normal
  • Capacity 47 liter
  • Talos 210, Stage IIIA (2011-2016)
  • Hydraulic system
  • Use: Normal
  • Capacity 55 liter
  • Talos 220, Stage IIIA (2011-2016)
  • Hydraulic system
  • Use: Normal
  • Capacity 55 liter
  • Talos 230, Stage IIIA (2011-2016)
  • Hydraulic system
  • Use: Normal
  • Capacity 55 liter
  • Talos 240, Stage IIIA (2011-2016)
  • Hydraulic system
  • Use: Normal
  • Capacity 55 liter

Additional Notes

  • All Claas Talos automatic transmission fluid specifications listed here cover a shared transmission/hydraulic system, meaning a single fluid reservoir serves both the transmission and the hydraulic circuit simultaneously.
  • The Talos 120 and Talos 130 Stage IIIA models from 2012-2016 share a 47-liter transmission/hydraulic system capacity, which is notably lower than the 55-liter figure found across the larger Talos variants in the same lineup.
  • The 55-liter capacity applies uniformly to the Talos 210, 220, 230, and 240 Stage IIIA models across both the 2011-2016 and 2016-2022 production periods, indicating no change in system volume between those two generations despite the updated specifications.
  • A 600-hour fluid change interval under normal use conditions appears in the 2016-2022 specifications for the Talos 210, 220, 230, and 240 Stage IIIA models. In agricultural machinery, hour-based intervals are standard because engine runtime is a more consistent measure of wear than calendar time or distance.
  • The 2011-2016 entries for the Talos 210, 220, 230, and 240 Stage IIIA carry only a capacity figure without an associated change interval, whereas the 2016-2022 entries for the same models include both the 55-liter capacity and the 600-hour service interval.
  • Stage IIIA refers to a European emissions regulation tier for non-road mobile machinery engines. All models in these specifications fall under that classification, which governed engine design and output characteristics during the production years listed.

Other Systems