Case - IH Quantum N
Differential fluid capacity & service interval
Case IH Quantum N differential fluid capacity is 4 liters. Service intervals include checking every 300 hours and changing every 1200 hours or 24 months. The data covers 8 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- The front differential fluid capacity is 4 liters across all Case IH Quantum N variants listed, from the Quantum 75N through the Quantum 110N. A uniform capacity across multiple power ratings in the same series typically reflects a shared axle assembly rather than axle sizing scaled to engine output.
- Quantum N variants from 2008-2014, including the 75N, 85N, 95N, and 105N, carry a fluid level check interval at 300 hours in addition to the standard change interval. A periodic check interval of this kind serves as an intermediate inspection point to detect fluid loss or contamination before the full drain-and-fill service is due.
- The 2018 and later variants, covering the 80N, 90N, 100N, and 110N, do not list a separate 300-hour check interval. The service schedule for these models moves directly to the change interval without an intermediate inspection step.
- All variants across both generation groups share the same change interval of 1,200 hours or 24 months, whichever comes first. The dual-trigger format, combining an hour-based threshold with a calendar-based threshold, accounts for equipment that accumulates low annual hours, where fluid degradation over time can occur independently of operational use.
- The 24-month calendar limit on the change interval means that even a Quantum N tractor seeing light seasonal use would reach a service point on time elapsed alone, before the 1,200-hour mark is approached.
- All specifications listed apply under normal use conditions. No severe-use intervals are defined in the provided data, meaning the 1,200-hour and 24-month thresholds represent standard operating expectations rather than reduced intervals for demanding applications.