Case - IH Axial-Flow, 30 Series

Coolant capacity & service interval

Case IH Axial-Flow 30 Series coolant capacity ranges from 32 to 69 liters. Service intervals include checks at 10 hours and changes at 1200 hours or 2000 hours/24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Axial-Flow 5130 (2013-2017)
  • Use: Normal
  • Capacity 32 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Axial-Flow 6130 (2013-2017)
  • Use: Normal
  • Capacity 32 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Axial-Flow 7130 (2013-2017)
  • Use: Normal
  • Capacity 32 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Axial-Flow 7230 (2013-2017)
  • Use: Normal
  • Capacity 52 liter
  • Check 10 hours
  • Change 1200 hours
Axial-Flow 8230 (2013-2017)
  • Use: Normal
  • Capacity 69 liter
  • Check 10 hours
  • Change 1200 hours
Axial-Flow 9230 (2013-2017)
  • Use: Normal
  • Capacity 69 liter
  • Check 10 hours
  • Change 1200 hours

Additional Notes

  • The Case-IH Axial-Flow 30 Series cooling system capacities span a wide range across the lineup, from 32 liters on the lower models up to 69 liters on the larger ones, reflecting the significantly different engine sizes involved.
  • The Axial-Flow 5130, 6130, and 7130 all share an identical 32-liter cooling system capacity for the 2013-2017 model years, indicating a common engine cooling architecture across those three models.
  • The Axial-Flow 7230 carries a 52-liter cooling system capacity, placing a clear step between the 32-liter group below and the 69-liter group above in the series hierarchy.
  • The Axial-Flow 8230 and 9230 both specify a 69-liter cooling system capacity, the largest in the 30 Series range for 2013-2017.
  • The 5130, 6130, and 7130 share a coolant change interval of 2000 hours or 24 months under normal use conditions, whichever comes first, giving operators a time-based ceiling even in lower-hour seasons.
  • The 7230, 8230, and 9230 carry a shorter coolant change interval of 1200 hours under normal use conditions, without an accompanying calendar-based interval, unlike the smaller models in the series.
  • All six models in the 2013-2017 Axial-Flow 30 Series specify a coolant level check interval of 10 hours under normal use conditions, a notably frequent inspection point consistent with the demands of high-output harvesting equipment.

Other Systems