Case - IH Axial-Flow, 30 Series

Automatic transmission fluid capacity & service interval

Case - IH Axial-Flow, 30 Series automatic transmission fluid capacity is 16,2 liters. Service intervals include checking at 100 hours and changing at 600 hours. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Axial-Flow 5130 (2013-2017)
  • Hydrostatic
  • Use: Normal
  • Capacity 16,2 liter
  • Check 100 hours
  • Change 600 hours
  • Axial-Flow 6130 (2013-2017)
  • Hydrostatic
  • Use: Normal
  • Capacity 16,2 liter
  • Check 100 hours
  • Change 600 hours
  • Axial-Flow 7130 (2013-2017)
  • Hydrostatic
  • Use: Normal
  • Capacity 16,2 liter
  • Check 100 hours
  • Change 600 hours

Additional Notes

  • The Case-IH Axial-Flow 30 Series covers the 5130, 6130, and 7130 models across the 2013-2017 model years, all sharing identical automatic transmission fluid specifications for the combined transmission and hydrostatic system.
  • A fluid capacity of 16.2 liters applies uniformly to the 5130, 6130, and 7130 across 2013-2017, indicating a service fill volume rather than a full overhaul or dry-fill figure, as hydrostatic transmission systems typically retain residual fluid during routine service.
  • The check interval is set at 100 hours of operation under normal use conditions, a relatively short inspection cycle that reflects the sensitivity of hydrostatic transmission systems to fluid condition and level.
  • The change interval of 600 hours under normal use conditions represents six times the check interval, meaning fluid level inspections occur multiple times before a full fluid replacement is due.
  • No variation in capacity or service intervals exists across the three models in the 2013-2017 range, despite the 5130, 6130, and 7130 representing different output tiers within the Axial-Flow 30 Series lineup.

Other Systems