Iveco EuroCargo Tector CNG
Coolant capacity & service interval
Iveco EuroCargo Tector CNG coolant capacity ranges from 14 to 18 liters. Service intervals include a 12 month check and a 36 month change. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| EuroCargo Tector CNG ML 120E(L)21 (2016- ) |
|
| EuroCargo Tector CNG ML 160E21 (2016- ) |
|
Additional Notes
- The Iveco EuroCargo Tector CNG ML 120E(L)21 carries a coolant capacity of 14-16 liters, while the ML 160E21 holds a notably wider range of 15-18 liters, reflecting differences in engine displacement and cooling circuit size between the two configurations.
- The capacity figures given for both configurations represent service fill volumes for the cooling system, meaning the amount of coolant required when servicing the circuit under normal operating conditions rather than a full overhaul drain.
- Both configurations share a 12-month check interval under normal use conditions, meaning the coolant level and condition are assessed on an annual basis regardless of mileage or operating load.
- The change interval for both configurations is set at 36 months under normal use, meaning a full coolant replacement is due every three years rather than being tied to a distance-based threshold.
- The overlap in capacity ranges between the ML 120E(L)21 and the ML 160E21 is narrow, with only the 15-liter value appearing in both ranges, indicating that the two configurations occupy distinct but adjacent volume bands for their cooling systems.