Iveco EuroCargo Tector (4x4)
Power steering fluid capacity & service interval
Iveco EuroCargo Tector (4x4) requires power steering fluid with a capacity of 2,3 liters. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| EuroCargo Tector ML 110 E22W (4x4) Euro 6 (2015- ) |
|
| EuroCargo Tector ML 150 E25W (4x4) Euro 6 (2015- ) |
|
| EuroCargo Tector ML 150 E28W (4x4) Euro 6 (2015- ) |
|
Additional Notes
- The Iveco EuroCargo Tector (4x4) Euro 6 power steering system carries a fluid capacity of 2.3 liters across the ML 110 E22W, ML 150 E25W, and ML 150 E28W variants introduced from 2015.
- A 2.3-liter capacity in a commercial vehicle power steering system is consistent with a hydraulic reservoir and circuit fill volume, representing the total system charge rather than a partial top-up quantity.
- All three configurations share an identical 2.3-liter specification, meaning no variation in power steering fluid capacity exists between the 110 E22W and the two 150-series variants despite differences in engine output ratings.
- The specifications are listed under normal use conditions, which in fluid service contexts refers to standard operating environments as opposed to elevated-stress or severe-duty cycles.