Iveco Ford EuroTrakker Cursor
Clutch fluid capacity & service interval
Iveco Ford EuroTrakker Cursor uses clutch fluid with a capacity of 0,5 liter. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Eurotrakker MP 190E27 /W Cursor (4x4) (1998-2002) |
|
| Eurotrakker MP 260E31 /H Cursor (6x4) (1998-2002) |
|
| Eurotrakker MP 340E35 /H Cursor (8x4/4) (1998-2002) |
|
Additional Notes
- The Iveco Ford EuroTrakker Cursor clutch fluid capacity is 0.5 liter across all three listed configurations, covering the MP 190E27 /W (4x4), MP 260E31 /H (6x4), and MP 340E35 /H (8x4/4) variants for the 1998-2002 model years.
- Each of the three configurations specifies a hydraulic clutch system, meaning the clutch actuation relies on fluid pressure rather than a mechanical cable linkage, which is why a defined fluid capacity figure applies.
- The 0.5 liter capacity figure is consistent across all axle configurations, from the lighter 4x4 MP 190E27 /W through to the heavier 8x4/4 MP 340E35 /H, indicating no variation in reservoir size between these drivetrain layouts.
- All three rows carry a normal use condition tied to the 0.5 liter capacity specification, applying uniformly across the MP 190E27 /W, MP 260E31 /H, and MP 340E35 /H variants within the 1998-2002 production span.