MBK Xover
Brake fluid capacity & service interval
MBK Xover uses brake fluid with a capacity range between min and max. Service intervals include checks at 1000 km and 3000 km, plus a change every 24 months. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Xover 125, YW125 (2010-2012) |
|
| Xover 125, YW125 (2010-2012) |
|
Additional Notes
- The MBK Xover 125 (YW125) brake fluid level is maintained between the minimum and maximum marks on the reservoir, a range-based fill standard rather than a fixed volume, which is typical for hydraulic brake system servicing where fluid is not drained and replaced in full during routine checks.
- Under normal use conditions, the brake fluid level on the 2010-2012 Xover 125 is scheduled for inspection every 3,000 km, giving a distance-based interval for routine monitoring.
- The normal use condition also carries a time-based fluid change interval of 24 months, meaning a full brake fluid replacement is due on a calendar cycle regardless of distance accumulated.
- An initial service check interval of 1,000 km is specified for the hydraulic brake system, a shorter distance than the standard 3,000 km check tied to normal use, reflecting the closer attention applied during the early break-in period of the vehicle.
- The initial service row for the 2010-2012 Xover 125 carries no fluid change interval, only a level check at 1,000 km, while the 24-month replacement requirement belongs exclusively to the normal use condition.