MBK Xover

Automatic transmission fluid capacity & service interval

MBK Xover automatic transmission fluid capacity ranges from 130 CM3 to 150 CM3. Service intervals include 1000 km and 6000 km or 12 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Xover 125, YW125 (2010-2012)
  • Use: Normal
  • Capacity 150 CM3 (Dry fill)
  • Capacity 130 CM3 (Service fill)
  • Change 6000 km/ 12 months
Xover 125, YW125 (2010-2012)
  • Use: Initial service
  • Capacity 150 CM3 (Dry fill)
  • Capacity 130 CM3 (Service fill)
  • Change 1000 km

Additional Notes

  • The MBK Xover 125 (YW125) automatic transmission carries a dry fill capacity of 150 cm³, which represents the total volume required when filling a completely drained or rebuilt transmission from empty.
  • The service fill capacity of 130 cm³ is the lower volume used during routine fluid changes, reflecting the residual fluid that remains in the transmission after a standard drain procedure.
  • The 20 cm³ difference between the dry fill and service fill figures is a meaningful distinction, as using the dry fill volume during a routine service would result in overfilling the transmission.
  • Under normal use conditions, the automatic transmission fluid change interval is set at 6000 km or 12 months, whichever comes first, with a service fill volume of 130 cm³ applying at each change.
  • An initial service interval of 1000 km is specified separately from the normal schedule, with the same 130 cm³ service fill capacity applying at that early change point.
  • The presence of a dedicated initial service interval at 1000 km reflects a break-in period practice, where early fluid contamination from component wear-in is addressed before the standard 6000 km cycle begins.

Other Systems