Mash Motors Quadrift

Differential fluid capacity & service interval

Mash Motors Quadrift differential fluid capacity is 300 to 320 CM3. Service intervals are 6000 km, 24 months, or 200 hours. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Quadrift 600 (2010-2016)
  • Front
  • Use: Normal
  • Capacity 300-320 CM3
  • Quadrift 600 (2010-2016)
  • Rear
  • Use: Normal
  • Capacity 300-320 CM3
  • Change 6000 km/ 24 months/ 200 hours

Additional Notes

  • The Mash Motors Quadrift 600 front differential carries a capacity of 300-320 CM3, which represents a relatively small fluid volume consistent with compact ATV-style front differential housings.
  • The rear differential on the Quadrift 600 shares the same 300-320 CM3 capacity range as the front, indicating a symmetrical differential design across both axles.
  • The 300-320 CM3 capacity range, rather than a fixed single value, reflects a fill window where the correct level falls between a minimum and maximum mark rather than an exact measured quantity.
  • The rear differential fluid change interval is specified at 6000 km, 24 months, or 200 hours under normal use conditions, meaning whichever of the three thresholds is reached first would trigger a service.
  • The 200-hour threshold in the rear differential interval is particularly relevant for off-road or low-speed working use, where engine hours accumulate faster relative to distance traveled.
  • The 24-month time-based interval applies regardless of distance or hours logged, meaning low-use units still require a fluid change within two years under normal conditions.

Other Systems