Mash Motors Mudstar

Differential fluid capacity & service interval

Mash Motors Mudstar differential fluid capacity is 300 to 320 CM3. Service intervals are 6000 km, 24 months, or 200 hours. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Mudstar 600 (2010-2016)
  • Front
  • Use: Normal
  • Capacity 300-320 CM3
  • Mudstar 600 (2010-2016)
  • Rear
  • Use: Normal
  • Capacity 300-320 CM3
  • Change 6000 km/ 24 months/ 200 hours

Additional Notes

  • The Mash Motors Mudstar 600 front differential carries a capacity of 300-320 CM3, which represents a relatively small fluid volume consistent with compact ATV or utility vehicle front differential housings.
  • The rear differential on the Mudstar 600 shares the same 300-320 CM3 capacity range as the front, indicating a symmetrical differential design between the two axles.
  • The 300-320 CM3 figure is expressed as a range rather than a fixed value, which typically reflects acceptable fill variation due to housing geometry or measurement method during a service fill procedure.
  • The rear differential fluid change interval is specified at 6000 km under normal use conditions, establishing a distance-based service threshold for standard operating environments.
  • A 24-month time-based interval accompanies the 6000 km distance interval for the rear differential, meaning whichever limit is reached first would govern the service timing regardless of mileage accumulation.
  • An additional 200-hour interval is specified for the rear differential, which applies to usage tracked by engine or operating hours rather than distance, a common measurement method in off-road and utility vehicle service schedules.
  • No change interval is listed in the front differential specifications, whereas the rear differential carries a full set of interval criteria across distance, time, and operating hours.

Other Systems