Lynx Commander

Coolant capacity & service interval

Lynx Commander coolant capacity ranges from 5,5 to 6,2 liters. Service intervals include a 12 month check and a 60 month change. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Commander 600R E-TEC (2019- )
  • Use: Normal
  • Between min and max.
  • Change 60 months
Commander 1200 4-TEC (2018-2018)
  • Use: Normal
  • Between min and max.
  • Check 12 months
  • Change 60 months
Commander 600 HO E-TEC (2018-2019)
  • Use: Normal
  • Capacity 5,5 liter
  • Change 60 months
Commander 800 E-TEC (2018-2018)
  • Use: Normal
  • Capacity 6,2 liter
  • Check 12 months
  • Change 60 months

Additional Notes

  • The Lynx Commander 800 E-TEC carries a 6.2-liter cooling system capacity, the largest among the listed configurations, while the Commander 600 HO E-TEC specifies a 5.5-liter capacity.
  • Two configurations, the Commander 1200 4-TEC and the Commander 600R E-TEC, express their coolant fill level as a range between minimum and maximum marks rather than a fixed volume, which is typical when the manufacturer expects level-based top-up rather than a measured refill.
  • The Commander 800 E-TEC and the Commander 1200 4-TEC both carry a 12-month check interval alongside the 60-month change interval, adding a periodic inspection requirement not present in the 600 HO E-TEC specification.
  • All four configurations share the same 60-month coolant change interval under normal use conditions, regardless of engine displacement or type.
  • The Commander 1200 4-TEC uses a 4-TEC engine, a four-stroke liquid-cooled platform, while the remaining three configurations use E-TEC two-stroke engines, yet all fall under the same 60-month coolant service interval.
  • The Commander 800 E-TEC is listed only for the 2018 model year, the same single-year span as the Commander 1200 4-TEC, whereas the Commander 600 HO E-TEC spans 2018-2019.

Other Systems