Lynx Commander
Brake fluid capacity & service interval
Lynx Commander uses brake fluid with a capacity range defined by minimum and maximum levels. Service intervals include checking every 12 months and changing every 6000 km or 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Commander 600R E-TEC (2019- ) |
|
| Commander 1200 4-TEC (2018-2018) |
|
| Commander 600 HO E-TEC (2018-2019) |
|
| Commander 800 E-TEC (2018-2018) |
|
Additional Notes
- All four Lynx Commander configurations listed share identical brake fluid service intervals: a check every 12 months and a change every 6,000 km or 24 months, whichever comes first, under normal use conditions.
- The fluid level specification of "between min and max" refers to the reservoir's marked minimum and maximum lines, a standard hydraulic brake system fill range that ensures adequate pressure without overfilling.
- The 24-month change interval reflects the hygroscopic nature of brake fluid, which absorbs moisture over time and lowers its boiling point regardless of distance traveled.
- The Commander 1200 4-TEC and Commander 800 E-TEC carry a 2018-2018 year range, meaning the brake fluid specifications listed apply to that single model year only.
- The Commander 600 HO E-TEC spans 2018-2019, while the Commander 600R E-TEC carries a starting year of 2019, distinguishing the two 600-class variants across the covered period.
- The dual-condition change interval of 6,000 km or 24 months means the time-based threshold of 24 months applies even when the distance figure has not been reached, a common approach for vehicles used infrequently.