Linhai LH 520 ATV

Brake fluid capacity & service interval

Linhai LH 520 ATV uses brake fluid with a capacity range defined by minimum and maximum levels. Service intervals occur every 24 months or 200 hours. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
ATN/ATV 520 4x2
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours
ATN/ATV 520 4x4
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours

Additional Notes

  • The Linhai LH 520 ATV carries a brake fluid fill level defined by a minimum-to-maximum range rather than a fixed volume, which is typical of hydraulic brake reservoirs where the fluid level is checked visually against markings on the reservoir body.
  • Both the 4x2 and 4x4 configurations share an identical service interval of 24 months or 200 operating hours, whichever comes first, under normal use conditions.
  • The dual-trigger interval structure, combining a time-based threshold of 24 months with an hours-based threshold of 200 hours, reflects the hygroscopic nature of brake fluid, which absorbs moisture over time regardless of how frequently the vehicle is operated.
  • The specifications apply to the hydraulic brake system on both drivetrain variants, indicating that both the 4x2 and 4x4 versions of the LH 520 ATV use a hydraulic rather than mechanical braking arrangement.