Linhai LH 500 ATV

Brake fluid capacity & service interval

Linhai LH 500 ATV uses brake fluid with a capacity range between min and max. Service intervals occur every 24 months or 200 hours. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
LH 500 ATV
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours

Additional Notes

  • The Linhai LH 500 ATV brake fluid level is maintained between the minimum and maximum marks on the reservoir, a fill range rather than a fixed volume, which reflects a top-up service standard rather than a measured overhaul capacity.
  • Under normal use conditions, brake fluid in the hydraulic brake system is due for replacement at 24 months or 200 hours, whichever comes first, following a dual-trigger interval structure based on both time and operational hours.
  • The 24-month time interval applies regardless of how few hours the vehicle has accumulated, meaning low-use operation still reaches a service point on the calendar before the 200-hour mark.
  • The 200-hour threshold serves as the usage-based counterpart to the time interval, applying to higher-activity operation where the hour limit may be reached before two years have elapsed.