Linhai LH 300 ATV

Brake fluid capacity & service interval

Linhai LH 300 ATV uses brake fluid with a capacity range between min and max. Service intervals occur every 24 months or 200 hours. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
ATN/ATV 300 (Demon, Goon, Rustler) 4X2
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours
ATN/ATV 300 (Muddy, Goon, Rustler) 4X4
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours

Additional Notes

  • The Linhai LH 300 ATV brake fluid level specification calls for a fill between the minimum and maximum marks on the reservoir, which is a standard service fill indicator rather than a measured volume capacity.
  • Both the 4X2 and 4X4 drivetrain configurations share an identical change interval of 24 months or 200 hours under normal use conditions, whichever comes first.
  • The ATN/ATV 300 variants covered across the Demon, Goon, Rustler, and Muddy sub-models all operate hydraulic brake systems, meaning the fluid is under pressure and subject to moisture absorption over time, which is the underlying reason for a time-based interval alongside an hours-based one.
  • The 200-hour threshold in the change interval reflects accumulated operating time, making the interval relevant for machines that see frequent use within a short calendar period, where 24 months could otherwise be reached before significant hours are logged.