Linhai LH 260 ATV
Brake fluid capacity & service interval
Linhai LH 260 ATV uses brake fluid with a capacity range between min and max. Service intervals occur every 24 months or 200 hours. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| ATV 260 4X2 |
|
| ATV 260 4X4 |
|
Additional Notes
- The Linhai LH 260 ATV brake fluid capacity specification calls for a fill level between the minimum and maximum marks on the reservoir, applying equally to both the 4X2 and 4X4 configurations. A min-to-max fill range rather than a fixed volume figure is standard practice for hydraulic brake reservoirs, where the fluid level is managed relative to visible reference points rather than a measured quantity.
- The service interval for brake fluid replacement is set at 24 months or 200 hours under normal use conditions, whichever comes first. The dual-trigger format, combining a time-based interval with an hours-based threshold, reflects the fact that brake fluid degrades through moisture absorption over time regardless of operational activity.
- Both the 4X2 and 4X4 variants share identical brake fluid service intervals and fill specifications, indicating no differentiation in brake fluid requirements between the two drivetrain configurations despite the mechanical differences a four-wheel-drive system introduces elsewhere in the vehicle.
- The note identifying a hydraulic brake system applies to both configurations, which is relevant context for the fill specification. A hydraulic system relies on fluid pressure transmission, making the maintenance of fluid level within the designated range a functional requirement for consistent brake performance.