Kymco ZX
Brake fluid capacity & service interval
Kymco ZX uses brake fluid with a capacity range between min and max. Service intervals include checks at 1500 km and 3000 km, with a change interval of 24 months. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| ZX 50 (2007- ) |
|
| ZX 50 (2007- ) |
|
Additional Notes
- The Kymco ZX 50 hydraulic brake system carries a fluid level specification expressed as a range rather than a fixed volume, with the accepted level falling between the minimum and maximum marks on the reservoir.
- Under normal use conditions, the brake fluid level on the ZX 50 is subject to an inspection interval of every 3,000 km, paired with a time-based replacement interval of every 24 months regardless of distance traveled.
- The 24-month change interval reflects the hygroscopic nature of brake fluid, which absorbs moisture over time and lowers its boiling point even when the fluid level remains within the acceptable range.
- An initial service check interval of 1,500 km applies to the ZX 50 hydraulic brake system, which is half the distance of the standard normal-use inspection interval, indicating a closer inspection window during the early service period.
- The initial service entry carries no fluid change interval, only a level check at 1,500 km, while the normal use entry is the one that establishes both the 3,000 km check and the 24-month replacement schedule.