Kymco Sento

Brake fluid capacity & service interval

Kymco Sento brake fluid capacity is between min and max. Service intervals include check 1000 km, check 2000 km, and change 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Sento 100 (2007- )
  • Use: Normal
  • Between min and max.
  • Check 2000 km
  • Change 24 months
Sento 100 (2007- )
  • Use: Initial service
  • Between min and max.
  • Check 1000 km
Sento 50 (2007- )
  • Use: Normal
  • Between min and max.
  • Check 2000 km
  • Change 24 months
Sento 50 (2007- )
  • Use: Initial service
  • Between min and max.
  • Check 1000 km

Additional Notes

  • The Kymco Sento brake fluid specification applies to the hydraulic brake system on both the Sento 50 and Sento 100, with the fluid level maintained between the minimum and maximum marks on the reservoir rather than expressed as a fixed volume.
  • Under normal use conditions, the brake fluid level on both variants is subject to a check interval of every 2000 km.
  • A fluid change interval of 24 months applies under normal use conditions to both the Sento 50 and Sento 100 hydraulic brake systems, reflecting the time-based degradation of brake fluid rather than mileage-driven wear alone.
  • An initial service check interval of 1000 km is specified for both variants, which is half the 2000 km interval applied under normal ongoing use, indicating a closer inspection window during the early service life of the brake system.
  • No fluid change interval is listed under the initial service condition for either variant, as only a level check at 1000 km is specified for that use category.