Kymco Quannon
Brake fluid capacity & service interval
Kymco Quannon uses brake fluid with a capacity range between min and max. Service intervals require a change every 24 months. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Quannon 150 (2010- ) |
|
| Quannon 125 (2008- ) |
|
Additional Notes
- The Kymco Quannon 125, introduced in 2008, and the Quannon 150, introduced in 2010, both use a hydraulic brake system, meaning brake fluid is contained within a closed circuit of lines, calipers, and a master cylinder rather than a mechanical linkage.
- Neither configuration specifies a discrete fluid volume in milliliters or ounces. Instead, the fill level is defined as the range between the minimum and maximum marks on the reservoir, which is the standard method for hydraulic brake systems where the exact volume varies with component wear and pad thickness.
- Both the 125 and 150 share an identical service interval of 24 months under normal use conditions, meaning routine riding without exposure to extreme heat, heavy braking loads, or moisture-intensive environments.
- A 24-month brake fluid change interval reflects the hygroscopic nature of glycol-based brake fluids, which absorb moisture from the atmosphere over time, lowering the fluid's boiling point and increasing the risk of vapor lock under braking stress.
- The normal use condition tied to the 24-month interval applies to both the Quannon 125 and 150 without distinction, indicating no separate severe-use interval is listed for either model in the available specifications.