Husqvarna WR

Brake fluid capacity & service interval

Husqvarna WR brake fluid capacity is between min and max. Service intervals include checking every 1 race and changing every 10 races. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
WR 360 (1999-2001)
  • Use: Normal
  • Between min and max.
  • Check 1 races
  • Change 10 races

Additional Notes

  • The Husqvarna WR 360 hydraulic brake system calls for fluid to be maintained between the minimum and maximum markers on the reservoir, a fill range rather than a fixed volume, which reflects a level-based service standard rather than a measured capacity.
  • Under normal use conditions, the WR 360 brake fluid level is subject to a check interval of every 1 race, indicating a high-frequency inspection cycle tied directly to racing activity rather than time or mileage.
  • The fluid change interval for the WR 360 brake system under normal use is set at every 10 races, meaning a full fluid replacement is due after ten times the frequency of each level check.

Other Systems