Husqvarna TXC

Clutch fluid capacity & service interval

Husqvarna TXC clutch fluid capacity ranges between min and max. Service intervals include checking at 40 hours and changing at 80 hours. Data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
TXC 250 R (2013-2013)
  • Use: Competition
  • Between min and max.
  • Check 40 hours
  • Change 80 hours
TXC 310 R (2013-2013)
  • Use: Competition
  • Between min and max.
  • Check 40 hours
  • Change 80 hours

Additional Notes

  • The Husqvarna TXC clutch fluid level is expressed as a range rather than a fixed volume, with the specification calling for fluid to sit between the minimum and maximum marks on the reservoir.
  • Both the TXC 250 R and TXC 310 R share identical service intervals for the hydraulic clutch system, with a fluid level check due at 40 hours and a full fluid change due at 80 hours.
  • The 40-hour check interval represents a mid-cycle inspection point, meaning the fluid is not replaced at that stage but only verified to remain within the acceptable min-to-max window.
  • The 80-hour change interval applies under competition use conditions, which typically involve higher operating stress than recreational riding and can accelerate fluid degradation through heat and moisture absorption.
  • Both the 250 R and 310 R specifications carry a competition use designation, meaning the 40- and 80-hour intervals are tied to that specific operating context rather than general trail or recreational riding.

Other Systems