Dinli DL 702
Differential fluid capacity & service interval
Dinli DL 702 uses differential fluid with a capacity of 150 CM3. Service intervals include checks at 2000 km, 6 months, or 100 hours, and changes every 24 months. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
Additional Notes
- The Dinli DL 702 front differential holds 150 CM3 of fluid, a relatively small volume consistent with compact ATV front differential assemblies designed for limited-slip or open differential mechanisms rather than larger axle housings.
- The 150 CM3 figure represents a service fill capacity, meaning the amount of fluid the front differential holds during normal operation rather than a full overhaul or flush volume.
- Under normal use conditions, the front differential fluid level is subject to a check interval of 2,000 km, 6 months, or 100 hours, whichever comes first, reflecting a multi-trigger inspection schedule tied to distance, time, and operating hours simultaneously.
- The change interval for the front differential fluid is set at 24 months under normal use conditions, meaning the fluid replacement cycle is governed by elapsed time rather than distance or hours in the change specification.
- The check interval incorporates an operating hours threshold of 100 hours, which is a common metric in ATV and off-road vehicle servicing where odometer distance alone does not accurately reflect mechanical wear due to variable terrain and load conditions.