Dinli DL 702

Coolant capacity & service interval

Dinli DL 702 coolant capacity ranges from 0,35 to 1,6 liters. Service intervals include checks at 1000 km, 3 months, or 50 hours, and changes every 24 months. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
DL 702 (2008- )
  • Use: Normal
  • Capacity 1,6 liter (Engine only)
  • Capacity 0,35 liter (Reservoir)
  • Check 1000 km/ 3 months/ 50 hours
  • Change 24 months

Additional Notes

  • The Dinli DL 702 cooling system carries a split capacity across two separate volumes: 1.6 liters for the engine itself and 0.35 liters for the reservoir, bringing the total system fill to 1.95 liters.
  • The 1.6-liter engine-only figure represents the primary circuit fill, which is the volume circulating through the engine block and head, while the 0.35-liter reservoir holds the overflow and expansion volume sitting outside the pressurized circuit.
  • A check interval of 1,000 km, 3 months, or 50 hours applies under normal use conditions, with whichever threshold arrives first serving as the trigger for inspection.
  • The 50-hour check interval is particularly relevant for off-road or recreational operation, where distance accumulation may be slow but engine hours can climb quickly relative to calendar time.
  • Coolant change intervals are set at 24 months under normal use, meaning the service cycle is governed by time rather than distance or hours for the drain-and-refill procedure.

Other Systems