Christini AWD

Coolant capacity & service interval

Christini AWD uses coolant with a capacity range of 1,1 to 1,2 liters. Service intervals include 150 km, 1000 km, 3500 km, 9000 km, 22000 km, 1 month, 2 hours, 3 months, 6 months, and 24 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
AWD 450DS (2017- )
  • Use: Normal
  • Capacity 1,2 liter (Dry fill)
  • Capacity 1,11 liter (Service fill)
  • Check 2 hours
  • Change 24 months
AWD 450, EXPLORER / DS / SM (2015- )
  • Use: Normal
  • Capacity 1,2 liter (Dry fill)
  • Capacity 1,11 liter (Service fill)
  • Change 9000 km
AWD 450, EXPLORER / DS / SM (2015- )
  • Use: Initial service
  • Capacity 1,2 liter (Dry fill)
  • Capacity 1,11 liter (Service fill)
  • Check 3 months
  • Change 22000 km/ 6 months
AWD 450, EXPLORER / DS / SM (2015- )
  • Use: Second change only
  • Capacity 1,2 liter (Dry fill)
  • Capacity 1,11 liter (Service fill)
  • Change 3500 km
AWD 450E (2015- )
  • Use: Normal
  • Capacity 1,2 liter (Dry fill)
  • Capacity 1,11 liter (Service fill)
  • Check 2 hours
  • Change 24 months
AWD 250 (2012- )
  • Use: Normal
  • Capacity 1,1 liter
AWD 300 (2012- )
  • Use: Normal
  • Capacity 1,1 liter
AWD 450 (2012-2014)
  • Use: Normal
  • Capacity 1,2 liter (Dry fill)
  • Capacity 1,11 liter (Service fill)
  • Check 1000 km/ 6 months
AWD 450 (2012-2014)
  • Use: Initial service
  • Capacity 1,2 liter (Dry fill)
  • Capacity 1,11 liter (Service fill)
  • Check 150 km/ 1 months

Additional Notes

  • The Christini AWD 250 and AWD 300, both with a starting year of 2012, share an identical cooling system capacity of 1.1 liters under normal use conditions. No dry fill or service fill distinction is listed for either variant, suggesting a single capacity figure applies regardless of fill context.
  • The AWD 450 variants carry a dry fill capacity of 1.2 liters, which represents the total volume required when filling a fully drained or newly assembled system. The service fill capacity of 1.11 liters reflects the slightly lower volume needed during a routine coolant change, where residual fluid remains in the system.
  • For the AWD 450 covering 2012-2014, the initial service interval calls for a coolant check at 150 km or 1 month, whichever comes first. Under normal use, the interval extends considerably to a check at 1,000 km or 6 months, indicating the early check is intended to catch any post-assembly settling or air pockets in a freshly filled system.
  • The AWD 450 EXPLORER / DS / SM variants from 2015 onward introduce a structured multi-stage service schedule. Under initial service conditions, a coolant check is due at 3 months, while a coolant change is specified at 22,000 km or 6 months. The normal use interval sets a coolant change at 9,000 km.
  • A second change only interval is listed for the AWD 450 EXPLORER / DS / SM from 2015, specifying a coolant change at 3,500 km. This interval sits between the initial service and normal use schedules, applying specifically to the second coolant change in the service sequence rather than routine ongoing maintenance.
  • The AWD 450DS from 2017 and the AWD 450E from 2015 share identical cooling system specifications under normal use: a dry fill of 1.2 liters, a service fill of 1.11 liters, a check interval of 2 hours, and a change interval of 24 months. The 2-hour check interval is notably short and is consistent with the demands of high-intensity off-road or enduro riding conditions.
  • Across the AWD 450 lineup, the shift from a kilometer-based change interval in the 2012-2014 generation to a time-based 24-month change interval in the AWD 450DS and AWD 450E reflects a difference in how service schedules are structured between those configurations, with the later variants prioritizing elapsed time over distance traveled.

Other Systems