Christini AWD

Brake fluid capacity & service interval

Christini AWD uses brake fluid with a capacity range between min and max. Service intervals include 1500 km, 150 km/10 hours/after the first break-in ride, 2 hours, and 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
AWD 450DS (2017- )
  • Use: Normal
  • Between min and max.
  • Check 2 hours
  • Change 24 months
AWD 450, EXPLORER / DS / SM (2015- )
  • Use: Normal
  • Between min and max.
  • Check 1500 km
AWD 450, EXPLORER / DS / SM (2015- )
  • Use: Initial service
  • Between min and max.
  • Check 150 km/ 10 hours/ after the first break-in ride
AWD 450E (2015- )
  • Use: Normal
  • Between min and max.
  • Check 2 hours
  • Change 24 months

Additional Notes

  • The Christini AWD 450 EXPLORER, DS, and SM variants share a brake fluid fill specification expressed as a range between minimum and maximum reservoir marks rather than a fixed volume, which is typical for hydraulic brake systems where the reservoir level is the primary service indicator.
  • Under normal use conditions, the AWD 450 EXPLORER, DS, and SM call for a brake fluid level check every 1,500 km, while the AWD 450DS and AWD 450E each specify a check interval of every 2 hours of operation instead.
  • The initial service interval for the AWD 450 EXPLORER, DS, and SM is notably shorter than the normal check interval, requiring a brake fluid level inspection at 150 km, 10 hours, or after the first break-in ride, whichever comes first. A dedicated break-in ride trigger is relatively uncommon and reflects the importance of verifying hydraulic integrity early in a new machine's life.
  • The AWD 450DS and AWD 450E both carry a brake fluid change interval of 24 months under normal use conditions. A time-based change interval of this kind is standard practice for glycol-based brake fluids, which absorb moisture over time and can lower the fluid's boiling point.
  • The AWD 450DS specifications begin with the 2017 model year, while the AWD 450E and the AWD 450 EXPLORER, DS, and SM group both carry specifications starting from 2015, meaning the 450DS entered the lineup two years after those other configurations.
  • No brake fluid change interval appears in the AWD 450 EXPLORER, DS, and SM specifications for either the normal or initial service rows, whereas the AWD 450DS and AWD 450E both include a 24-month change interval alongside their check intervals.

Other Systems