Bimota Tesi
Coolant capacity & service interval
Bimota Tesi coolant capacity is 2,9 liters. Service intervals are 20000 km or 24 months. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Tesi 1D 851 (1991-1993) |
|
| Tesi 1D 906 (1991-1994) |
|
Additional Notes
- Both the Tesi 1D 851 and the Tesi 1D 906 share an identical cooling system capacity of 2.9 liters, which represents the total volume of the cooling circuit including the radiator, hoses, and engine passages filled during a standard service.
- The Bimota Tesi 1D 851 covers model years 1991-1993, while the Tesi 1D 906 spans 1991-1994, meaning the two variants overlapped in production for three consecutive years.
- A change interval of 20,000 km or 24 months, whichever comes first, applies to both variants under normal use conditions, meaning the time-based threshold of two years can trigger a coolant change independently of mileage accumulation.
- The 2.9-liter figure applies to the cooling system as a whole rather than a partial drain-and-fill, indicating a full system service volume rather than a lesser top-up quantity.
- The shared capacity and interval specifications across both the 851 and 906 engine displacements suggest the two variants use the same cooling circuit architecture despite differing in engine size.