Bimota Tesi 3D

Brake fluid capacity & service interval

Bimota Tesi 3D brake fluid capacity ranges between min and max values. Service intervals include checks at 1000 km/6 months and 12000 km/12 months, with changes at 36000 km/36 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Tesi 3D (2009- )
  • Use: Normal
  • Between min and max.
  • Check 12000 km/ 12 months
  • Change 36000 km/ 36 months
Tesi 3D (2009- )
  • Use: Initial service
  • Between min and max.
  • Check 1000 km/ 6 months

Additional Notes

  • The Bimota Tesi 3D hydraulic brake system calls for a fluid level maintained between the minimum and maximum marks, which is a standard reservoir-based fill reference rather than a fixed volume capacity.
  • Under normal use conditions, the hydraulic brake system requires a fluid level check every 12,000 km or 12 months, whichever comes first.
  • The fluid change interval under normal use is set at 36,000 km or 36 months, meaning the brake fluid is replaced on a three-year or distance-based cycle.
  • An initial service check is specified at 1,000 km or 6 months, applying a shorter inspection interval early in the service life of the hydraulic brake system.

Other Systems