Argo XTD

Brake fluid capacity & service interval

Argo XTD uses brake fluid with a capacity range between min and max. Service intervals include checking at 50 hours and changing at 150 hours. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
8x8 750 XTD (2013- )
  • Use: Normal
  • Between min and max.
  • Check 50 hours
  • Change 150 hours

Additional Notes

  • The Argo XTD 8x8 750 carries a brake fluid capacity defined by a minimum-to-maximum range rather than a fixed volume, which is characteristic of hydraulic brake systems where the reservoir level fluctuates with pad wear and is monitored visually against marked indicators on the reservoir body.
  • Under normal use conditions, the hydraulic brake system on the 8x8 750 XTD calls for a fluid level inspection at every 50-hour interval, reflecting a time-in-operation service schedule rather than a mileage-based one, as is common for off-road utility vehicles measured in engine hours.
  • The fluid change interval for the 8x8 750 XTD is set at 150 hours under normal use conditions, meaning a full drain and refill of the hydraulic brake system is due once every three inspection cycles.

Other Systems