Argo Vanguard
Brake fluid capacity & service interval
Argo Vanguard uses brake fluid with a capacity range between min and max. Service intervals include 50 hours for checks and 150 hours for changes. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 6x6 Vanguard2 (2004-2007) |
|
Additional Notes
- The Argo Vanguard 6x6 Vanguard2 runs a hydraulic brake system, which relies on pressurized fluid to transfer braking force through the system.
- Under normal use conditions, the brake fluid level is maintained between the minimum and maximum marks on the reservoir rather than filled to a fixed volume, indicating a level-based service standard rather than a measured capacity fill.
- The inspection interval for the 6x6 Vanguard2 is set at every 50 hours of operation, which is a relatively short cycle and reflects the monitoring frequency appropriate for a hydraulic system where fluid condition and level directly affect braking performance.
- The full fluid change interval for the 2004-2007 6x6 Vanguard2 is 150 hours under normal use conditions, which is three times the inspection interval, meaning three checks occur between each complete fluid replacement.