Argo Conquest
Coolant capacity & service interval
The Argo Conquest coolant specifications cover a fluid capacity range of 2 to 4.5 liters. The data includes 5 different configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 8x8 Conquest Pro 1050 XT-D (2013- ) |
|
| Conquest 800 8x8 (2012- ) |
|
| Conquest Pro 800 8x8 (2012- ) |
|
| 6x6 Conquest (2004-2007) |
|
| 8x8 Conquest (2004-2007) |
|
Additional Notes
- The 6x6 and 8x8 Argo Conquest models from 2004-2007 share an identical cooling system capacity of 2.7 liters, indicating a common engine cooling architecture across both drivetrain configurations during that production period.
- The 8x8 Conquest Pro 1050 XT-D, introduced from 2013, carries the largest cooling system capacity in the lineup at 4.5 liters, reflecting the greater thermal management demands of the larger 1050 engine displacement.
- The Conquest 800 8x8 and Conquest Pro 800 8x8, both introduced from 2012, share a cooling system capacity of 2.0 liters, which is notably lower than the 2.7-liter figure of the earlier 2004-2007 8x8 models despite both being 8x8 configurations.
- A cooling system capacity of 2.0 liters, as seen in the 800-series models from 2012, represents a relatively modest volume, consistent with smaller-displacement engines that generate less heat load and require less coolant circulation to maintain operating temperatures.
- All five configurations list coolant capacity under normal use conditions, meaning the specified volumes apply to standard operating environments rather than severe-duty or high-stress service scenarios.
- The capacity difference between the 2004-2007 8x8 at 2.7 liters and the 2012 Conquest 800 8x8 at 2.0 liters illustrates how engine displacement directly influences cooling system volume requirements across different generations of the same platform.