Argo Centaur

Brake fluid capacity & service interval

Argo Centaur brake fluid capacity ranges between min and max values. Service intervals occur every 50 hours. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Centaur 8x8 XTI 950D (2011-2016)
  • Use: Normal
  • Between min and max.
  • Check 50 hours
Centaur 8x8 XTI 950DT (2011-2016)
  • Use: Normal
  • Between min and max.
  • Check 50 hours
Centaur 8x8 XTI 950G (2011-2016)
  • Use: Normal
  • Between min and max.
  • Check 50 hours

Additional Notes

  • The Argo Centaur brake fluid specifications apply to a hydraulic brake system across all three 8x8 XTI variants covered in the 2011-2016 model years.
  • Rather than a fixed fill volume, the capacity specification calls for fluid level to sit between the minimum and maximum marks on the reservoir, which is a level-based service standard rather than a measured quantity.
  • The 950D, 950DT, and 950G variants all share an identical 50-hour brake fluid check interval under normal use conditions.
  • The 50-hour interval is an inspection interval, not a replacement interval, meaning the specification calls for a level check at that frequency rather than a scheduled fluid exchange.
  • All three variants, the 950D, 950DT, and 950G, carry the same brake fluid service specifications with no differentiation between the diesel and gasoline engine configurations.