Argo Avenger
Brake fluid capacity & service interval
Argo Avenger uses brake fluid with a capacity range between min and max. Service intervals include checking at 50 hours and changing at 150 hours. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 8x8 Avenger 800 (2012- ) |
|
| 8x8 Avenger 750 EFI (2010-2012) |
|
| 8x8 Avenger 700 (2007-2012) |
|
| 8x8 Avenger 750 EFI (2007-2010) |
|
| Avenger (2004-2007) |
|
| Avenger EFI (2004-2007) |
|
Additional Notes
- Brake fluid level across all Argo Avenger configurations is specified by a reservoir min-max range rather than a fixed volume, which is standard practice for hydraulic brake systems where the fluid level drops gradually as brake pads wear.
- The 50-hour check interval applies to normal use conditions and reflects a time-based service schedule measured in engine operating hours rather than distance, which is typical for off-road utility vehicles that may accumulate hours at low or variable speeds.
- The 150-hour change interval under normal use conditions applies uniformly across all listed Avenger configurations, from the base Avenger (2004-2007) through the 8x8 Avenger 800 (2012- ).
- The Argo Avenger 8x8 700 and both 8x8 750 EFI variants share identical brake fluid service intervals despite differences in engine displacement and fuel delivery, indicating the hydraulic brake system architecture is consistent across those configurations.
- The 8x8 Avenger 750 EFI appears across two separate year ranges, 2007-2010 and 2010-2012, with no difference in brake fluid specifications between the two, suggesting a mid-production revision that did not affect the hydraulic brake system requirements.
- The base Avenger and Avenger EFI, both covering 2004-2007, carry the same brake fluid check and change intervals, meaning the addition of electronic fuel injection in the EFI variant had no bearing on brake system service scheduling.