Piaggio APE

Manual transmission fluid capacity & service interval

Piaggio APE manual transmission fluid capacity is 1,08 liters. Service intervals include checks at 5000 km and changes at 1000 km, 10000 km/12 months, and 10000 km/24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
APE Classic 400 (2013- )
  • Use: Normal
  • Capacity 1,08 liter
  • Change 10000 km/ 12 months
  • Code: 4/1
APE Classic 400 (2013- )
  • Use: Initial service
  • Capacity 1,08 liter
  • Change 1000 km
  • Code: 4/1
APE Calessino (2007-2009)
  • Use: Normal
  • Between min and max.
  • Check 5000 km
  • Code: 4/1
APE Classic Lombardini (2006- )
  • Use: Normal
  • Between min and max.
  • Check 5000 km
  • Code: 4/1
APE TM Diesel LCS
  • Use: Normal
  • Between min and max.
  • Check 5000 km
  • Code: 4/1
APE TM P703
  • Use: Normal
  • Between min and max.
  • Change 10000 km/ 24 months
  • Code: 4/1

Additional Notes

  • The Piaggio APE Classic 400 (2013- ) carries a manual transmission fluid capacity of 1.08 liters, a fixed volume that applies to both the normal service interval and the initial service fill, indicating a full drain-and-refill quantity rather than a top-up estimate.
  • Under normal use conditions, the APE Classic 400 transmission fluid change interval is set at 10,000 km or 12 months, whichever comes first, pairing a distance threshold with a time-based limit.
  • The initial service interval for the APE Classic 400 transmission is 1,000 km, a significantly shorter interval than the standard 10,000 km cycle, reflecting the common practice of an early fluid change to remove metal particles generated during mechanical break-in.
  • The APE Calessino (2007-2009) and APE Classic Lombardini (2006- ) both specify a level-based maintenance approach rather than a fixed capacity, with the service action defined as a fluid level check at 5,000 km intervals under normal use conditions.
  • The APE TM Diesel LCS follows the same level-check-at-5,000 km specification as the Calessino and Classic Lombardini, with no fixed drain volume listed, meaning service is conditional on the fluid sitting between the minimum and maximum marks.
  • The APE TM P703 diverges from the level-check approach by specifying an actual fluid change at 10,000 km or 24 months under normal use conditions. The 24-month time limit is notably longer than the 12-month limit applied to the APE Classic 400, despite both sharing the same 10,000 km distance threshold.

Other Systems