Mitsubishi Canter TF (EU)

Manual transmission fluid capacity & service interval

Mitsubishi Canter TF (EU) manual transmission fluid capacity ranges from 3,5 to 3,8 liters. The service interval for fluid changes is 80000 km. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Canter TF 3C13 Euro 5, EEV, FE (2011- )
  • Use: Normal
  • Capacity 3,5-3,8 liter
  • Change 80000 km
  • Code: M038S5 5/1
Canter TF 3C15 Euro 5, EEV, FE (2011- )
  • Use: Normal
  • Capacity 3,5-3,7 liter
  • Change 80000 km
  • Code: M038S5 5/1
Canter TF 3C18 Euro 5, EEV, FE (2011- )
  • Use: Normal
  • Capacity 3,5-3,7 liter
  • Change 80000 km
  • Code: M038S5 5/1
Canter TF 3S15 Euro 5, EEV, FE (2011- )
  • Use: Normal
  • Capacity 3,5-3,7 liter
  • Change 80000 km
  • Code: M038S5 5/1
Canter TF 6C18 4x4 Euro 5, EEV, FG (2011- )
  • Use: Normal
  • Capacity 3,5-3,8 liter
  • Change 80000 km
  • Code: M038S5 5/1
Canter TF 7C18 Euro 5, EEV, FE (2011- )
  • Use: Normal
  • Capacity 3,5-3,8 liter
  • Change 80000 km
  • Code: M038S5 5/1

Additional Notes

  • Across all Mitsubishi Canter TF (EU) configurations listed, the manual transmission fluid change interval is set at 80,000 km under normal use conditions.
  • The capacity range given for each configuration represents a service fill tolerance rather than a fixed volume. A spread between the lower and upper figures accounts for minor variation in drain completeness and refill conditions.
  • The 3C13 and 7C18 configurations share a capacity range of 3.5–3.8 liters, which is the widest spread among the listed variants, indicating a slightly broader acceptable fill window compared to the 3.5–3.7 liter range seen in other configurations.
  • The 3C15, 3C18, and 3S15 configurations all carry an identical capacity range of 3.5–3.7 liters, despite differing in engine displacement or body type designation.
  • The 3S15 variant shares the same 3.5–3.7 liter capacity and 80,000 km interval as the 3C15 and 3C18, even though the "S" designation in the model code differs from the "C" designation used in the other three-axle configurations.
  • The 6C18 4x4 FG configuration carries a capacity range of 3.5–3.8 liters. The 4x4 drivetrain designation distinguishes the 6C18 from the other listed variants, yet the manual transmission fluid capacity aligns with the wider 3.5–3.8 liter range rather than the narrower 3.5–3.7 liter range.
  • All six configurations share a starting year of 2011 and are specified for Euro 5 and EEV emission standards, with the 80,000 km service interval applying uniformly across that entire group under normal use.

Other Systems