Mitsubishi Canter TF (EU)

Automatic transmission fluid capacity & service interval

Mitsubishi Canter TF (EU) automatic transmission fluid capacity ranges from 2 to 3,8 liters. The service interval is 80000 km. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Canter TF 3C13 Euro 5, EEV, FE (2011- )
  • Clutch part
  • Use: Normal
  • Capacity 2-3,3 liter (Service fill)
  • Change 80000 km
  • Code: M038S6 (DUONIC)
  • Canter TF 3C13 Euro 5, EEV, FE (2011- )
  • Transmission part
  • Use: Normal
  • Capacity 3,5-3,8 liter
  • Change 80000 km
  • Code: M038S6 (DUONIC) 6/1
  • Canter TF 3C15 Euro 5, EEV, FE (2011- )
  • Clutch part
  • Use: Normal
  • Capacity 2-3,3 liter (Service fill)
  • Change 80000 km
  • Code: M038S6 (DUONIC)
  • Canter TF 3C15 Euro 5, EEV, FE (2011- )
  • Transmission part
  • Use: Normal
  • Capacity 3,5-3,7 liter
  • Change 80000 km
  • Code: M038S6 (DUONIC) 6/1
  • Canter TF 3S15 Euro 5, EEV, FE (2011- )
  • Clutch part
  • Use: Normal
  • Capacity 2-3,3 liter (Service fill)
  • Change 80000 km
  • Code: M038S6 (DUONIC)
  • Canter TF 3S15 Euro 5, EEV, FE (2011- )
  • Transmission part
  • Use: Normal
  • Capacity 3,5-3,7 liter
  • Change 80000 km
  • Code: M038S6 (DUONIC) 6/1

Additional Notes

  • The Mitsubishi Canter TF semi-automatic transmission is treated as two separate fluid compartments in the specifications: a clutch part and a transmission part, each with its own distinct capacity range.
  • The clutch part across the 3C13, 3C15, and 3S15 variants carries a service fill designation, with a capacity range of 2.0 to 3.3 liters. A service fill value reflects the amount of fluid needed during a routine drain-and-refill procedure, which is typically less than a full overhaul fill because residual fluid remains in the system.
  • The transmission part of the 3C13 variant holds 3.5 to 3.8 liters, while the same compartment on the 3C15 and 3S15 variants holds a slightly narrower range of 3.5 to 3.7 liters.
  • The capacity ranges rather than fixed single values reflect real-world variation during a fluid service, where the exact amount accepted can depend on fluid temperature, drain completeness, and system state at the time of the fill.
  • All six specification rows share an identical service interval of 80,000 km under normal use conditions, applying uniformly to both the clutch part and the transmission part across all three variants.
  • The 80,000 km change interval is tied specifically to normal use conditions. No severe-use interval appears in the specifications for any of the listed configurations.
  • The 3C13, 3C15, and 3S15 designations indicate different engine or powertrain configurations within the Canter TF lineup, yet the clutch part fluid capacity specification is identical across all three at 2.0 to 3.3 liters.

Other Systems