Iveco Leoncino

Coolant capacity & service interval

Iveco Leoncino coolant capacity is 13 liters. Service intervals include checking every 12 months and changing every 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Leoncino DL50Y12 (2010-2013)
  • Use: Normal
  • Capacity 13 liter
  • Check 12 months
  • Change 24 months
Leoncino DL50Y13 (2010-2013)
  • Use: Normal
  • Capacity 13 liter
  • Check 12 months
  • Change 24 months
Leoncino DL60Y12 (2010-2013)
  • Use: Normal
  • Capacity 13 liter
  • Check 12 months
  • Change 24 months
Leoncino DL60Y13 (2010-2013)
  • Use: Normal
  • Capacity 13 liter
  • Check 12 months
  • Change 24 months
Leoncino DN35Y12 (2010-2013)
  • Use: Normal
  • Capacity 13 liter
  • Check 12 months
  • Change 24 months
Leoncino DN35Y13 (2010-2013)
  • Use: Normal
  • Capacity 13 liter
  • Check 12 months
  • Change 24 months

Additional Notes

  • All six Iveco Leoncino configurations covered in the 2010-2013 model range share an identical cooling system capacity of 13 liters, indicating a uniform cooling circuit volume across the DL50Y, DL60Y, and DN35Y engine families.
  • A 13-liter coolant capacity is relatively substantial for a light-to-medium commercial vehicle, reflecting a cooling circuit sized to manage the thermal demands of sustained load-bearing operation.
  • The check interval for all listed configurations is set at 12 months under normal use conditions, meaning coolant condition and level are assessed annually without requiring a full drain and refill at that point.
  • The change interval across all six configurations is 24 months under normal use, placing the full coolant replacement on a two-year cycle rather than an annual one.
  • The 12-month check and 24-month change schedule means a coolant inspection falls between every full replacement, creating a staggered maintenance pattern where the system is assessed at the midpoint of each change cycle.
  • The Y12 and Y13 suffix variants within each engine family, such as the DL50Y12 and DL50Y13, carry identical cooling system specifications, indicating no differentiation in coolant capacity or service intervals between those sub-variants.
  • All specifications are designated for normal use conditions, meaning the listed intervals apply to standard operating environments rather than severe-duty cycles such as extreme temperatures or heavy continuous loading.

Other Systems