Fiat Fullback, 502, 503 (EU)
Coolant capacity & service interval
Fiat Fullback, 502, 503 (EU) models require 7,7 liters of coolant. Service intervals occur every 20000 km or 12 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Fullback 2.4 D 2WD (113 kW) (2016-2020) |
|
| Fullback 2.4 D 4WD (113 kW) (2016-2020) |
|
| Fullback 2.4 D 4WD (133 kW) (2016-2020) |
|
Additional Notes
- All three Fiat Fullback 2.4 D configurations listed for 2016-2020 share an identical cooling system capacity of 7.7 liters, covering both 2WD and 4WD drivetrains as well as both the 113 kW and 133 kW power outputs.
- A 7.7-liter cooling system capacity is a relatively modest figure for a pickup truck platform, consistent with a mid-displacement four-cylinder diesel engine where the coolant circuit encompasses the engine block, cylinder head, heater core, and radiator.
- The check interval for the cooling system across all listed configurations is set at 20,000 km or 12 months under normal use conditions, whichever comes first.
- The 20,000 km or 12-month check interval applies specifically to normal use conditions, meaning the schedule is tied to standard operating environments rather than severe-duty cycles.
- The capacity figure of 7.7 liters represents a service fill measurement, indicating the volume required when replenishing or refilling the cooling system during routine maintenance rather than a full overhaul drain-and-fill of a disassembled engine.
- Despite the power difference between the 113 kW and 133 kW variants of the 2.4 D engine, the cooling system capacity remains unchanged at 7.7 liters, suggesting both outputs share the same fundamental engine architecture and coolant circuit dimensions.