Welte Skidders

Coolant capacity & service interval

Welte Skidders use coolant with a capacity of 35 liters. The service interval for the fluid is 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
W110, Deutz TCD 2013 L04 2V (2010-2014)
  • Use: Normal
  • Capacity 35 liter
  • Change 24 months
W130/K/M/T (113 kW), Deutz TCD 2013 L04 2V (2010-2014)
  • Use: Normal
  • Capacity 35 liter
  • Change 24 months
W130/K/M/T (129 kW), Deutz TCD 2013 L04 2V (2010-2014)
  • Use: Normal
  • Capacity 35 liter
  • Change 24 months
W180, Deutz TCD 2013 L04 2V (2010-2014)
  • Use: Normal
  • Capacity 35 liter
  • Change 24 months
W210, Deutz TCD 2013 L04 2V (2010-2014)
  • Use: Normal
  • Capacity 35 liter
  • Change 24 months
W230, Deutz TCD 2013 L04 2V (2010-2014)
  • Use: Normal
  • Capacity 35 liter
  • Change 24 months

Additional Notes

  • All six Welte Skidders configurations covered in the 2010-2014 range share the Deutz TCD 2013 L04 2V engine, and every one of them carries an identical cooling system capacity of 35 liters.
  • A 35-liter coolant capacity is notably large relative to passenger vehicles, reflecting the heavy-duty industrial nature of forestry skidder machinery, where extended engine operation under high thermal load demands a substantial coolant volume.
  • The W130 variant appears in two distinct power outputs — 113 kW and 129 kW — yet both share the same Deutz TCD 2013 L04 2V engine family and the same 35-liter cooling system capacity, indicating the power difference does not alter the cooling circuit volume.
  • The model range spans from the W110 through to the W230, covering meaningfully different machine sizes and power classes, yet the uniform 35-liter figure across all configurations points to a standardized cooling system architecture within the Deutz TCD 2013 L04 2V platform.
  • The 24-month change interval applies under normal use conditions across all listed configurations. In heavy equipment contexts, a normal use designation typically refers to operation within the manufacturer's standard duty cycle parameters, as opposed to extended idling, extreme ambient temperatures, or continuous maximum-load operation.
  • A time-based interval of 24 months, rather than an hour-meter or mileage figure, is a common approach for coolant service in industrial machinery where operating hours can vary widely between units, making calendar time a more consistent maintenance trigger.

Other Systems