Wagner Steel handlers, SW/CP

Differential fluid capacity & service interval

Wagner Steel handlers, SW/CP models require differential fluid with a capacity of 189 liters. Service intervals include checks at 1 month or 250 hours and changes at 12 months or 2000 hours. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • SW-100F, Cummins QSX15 (2009- )
  • Front
  • Use: Normal
  • Capacity 189 liter
  • Check 1 months/ 250 hours
  • Change 12 months/ 2000 hours
  • Code: Clark

Additional Notes

  • The front differential on the Wagner Steel handlers SW/CP SW-100F with Cummins QSX15 engine carries a fluid capacity of 189 liters, a figure consistent with heavy industrial equipment where large sump volumes are required to maintain adequate lubrication across high-load axle components.
  • Under normal use conditions, the SW-100F front differential fluid is subject to a check interval of 1 month or 250 hours, whichever comes first, reflecting a dual-trigger schedule common in heavy machinery where calendar time and operational hours may accumulate at different rates depending on shift patterns.
  • The change interval for the SW-100F front differential fluid under normal use is set at 12 months or 2,000 hours, meaning a full year of operation or 2,000 accumulated engine hours marks the threshold for a complete fluid replacement rather than a simple level check.
  • The ratio between the check interval (250 hours) and the change interval (2,000 hours) on the SW-100F front differential is 1:8, indicating that eight inspection cycles are expected to occur for every single fluid change cycle under normal operating conditions.

Other Systems