Wagner Steel handlers, SW/CP

Coolant capacity & service interval

Wagner Steel handlers, SW/CP models utilize coolant with a capacity range of 55 to 85 liters. Service intervals include a 10 hour check and a 6 month or 1000 hour change. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
SW-100F, Cummins QSX15 (2009- )
  • Use: Normal
  • Capacity 85 liter
  • Check 10 hours
  • Change 6 months/ 1000 hours
CP160, Caterpillar 3406E
  • Use: Normal
  • Capacity 55 liter
  • Check 10 hours
  • Change 6 months/ 1000 hours

Additional Notes

  • The Wagner CP160 with the Caterpillar 3406E engine carries a cooling system capacity of 55 liters, while the SW-100F with the Cummins QSX15 engine holds a notably larger 85 liters, reflecting the greater thermal demands of the QSX15 powerplant.
  • Both configurations share a 10-hour coolant check interval under normal use conditions, a frequency consistent with heavy equipment operating in demanding cycles where fluid levels and condition can shift quickly.
  • The change interval for both the CP160 and SW-100F cooling systems is set at 6 months or 1,000 hours under normal use, whichever comes first, pairing a calendar-based limit with an hours-based one to account for varying operational intensity.
  • The 30-liter difference in cooling system capacity between the Wagner CP160 and the SW-100F means a full drain-and-fill service on the SW-100F requires significantly more coolant volume, a practical consideration for parts and fluid procurement before scheduled maintenance.

Other Systems