Pel-Job Tracked loaders

Coolant capacity & service interval

Pel-Job Tracked loaders use coolant with capacities ranging from 4.5 to 13.3 liters depending on the configuration. Four configurations are covered in the data.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
EC20
  • Use: Normal
  • Capacity 4,5 liter
EC25
  • Use: Normal
  • Capacity 6 liter
EC45
  • Use: Normal
  • Capacity 8,5 liter
EC55
  • Use: Normal
  • Capacity 13,3 liter

Additional Notes

  • The Pel-Job EC20 tracked loader has a cooling system capacity of 4.5 liters, the smallest among the four listed models, reflecting the compact engine displacement typical of a machine in this size class.
  • The EC25 cooling system holds 6 liters, a moderate increase over the EC20 that corresponds to the step up in machine size and engine output between the two models.
  • The EC45 cooling system capacity of 8.5 liters places it in a mid-range bracket, consistent with the larger engine and greater thermal load management required at that machine weight class.
  • The EC55 carries the largest cooling system capacity across the four models at 13.3 liters, nearly three times the EC20 figure, indicating a substantially larger engine with higher heat rejection requirements.
  • All four cooling system capacities are specified under normal use conditions, meaning the listed volumes apply to standard operating environments rather than severe-duty or high-temperature service scenarios.
  • Cooling system capacity figures of this type represent the total system fill volume, encompassing the engine block, cylinder head passages, radiator, and connecting hoses rather than the radiator alone.