Menzi Muck Tracked excavator, Master/Miles M5

Coolant capacity & service interval

Menzi Muck Tracked excavator, Master/Miles M5 uses coolant with a capacity of 24 liters. Service intervals include checks every 10 hours and changes every 2000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
M510, Deutz TCD 4.1 L4
  • Use: Normal
  • Capacity 24 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
M515, Deutz TCD 4.1 L4
  • Use: Normal
  • Capacity 24 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
M580, Deutz TCD 4.1 L4
  • Use: Normal
  • Capacity 24 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
M585, Deutz TCD 4.1 L4
  • Use: Normal
  • Capacity 24 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • All four M5 variants equipped with the Deutz TCD 4.1 L4 engine share a uniform cooling system capacity of 24 liters, a figure consistent with the demands of a four-cylinder liquid-cooled diesel in a heavy-duty tracked excavator application.
  • The 10-hour coolant level check interval across the M510, M515, M580, and M585 reflects standard practice for construction equipment operating in demanding environments, where thermal stress and minor seepage can affect coolant levels between major service events.
  • The coolant change interval is specified at 2000 hours or 24 months under normal use conditions, whichever comes first. The dual-trigger format accounts for both high-utilization machines that accumulate hours quickly and lower-utilization units where calendar-based degradation of coolant additives becomes the limiting factor.
  • The M510 and M515 share identical cooling system specifications with the M580 and M585, despite the numerical designations suggesting differences in power output or configuration. All four models draw on the same Deutz TCD 4.1 L4 engine platform, which accounts for the uniform 24-liter capacity and service intervals.
  • A 24-liter cooling system capacity is relatively substantial for a four-cylinder engine and reflects the extended circuit typical of tracked excavators, where coolant circulates through not only the engine block and radiator but also ancillary systems such as hydraulic oil coolers and cab heating circuits.
  • The 2000-hour change interval for the Menzi Muck M5 series aligns with extended-life coolant formulations commonly specified for Deutz TCD engines, which are designed to maintain corrosion inhibitor effectiveness over long service periods under normal operating conditions.