Menzi Muck Tracked carriers, IHI

Coolant capacity & service interval

Menzi Muck Tracked carriers, IHI use coolant with a capacity range of 7,8 to 24,5 liters. Service intervals consist of a 10 hour check and a 24 month change. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Menzi Max 30rk, Kubota V2403-M
  • Use: Normal
  • Capacity 7,8 liter
  • Check 10 hours
  • Change 24 months
Menzi Max 50vk, Isuzu 4JJ1
  • Use: Normal
  • Capacity 16,4 liter
  • Check 10 hours
  • Change 24 months
Menzi Max 70vk, MItsubishi 6D16-TLU2B
  • Use: Normal
  • Capacity 24,5 liter
  • Check 10 hours
  • Change 24 months

Additional Notes

  • Cooling system capacities across the Menzi Muck Tracked carriers, IHI range span a wide range, from 7.8 liters in the Menzi Max 30rk with Kubota V2403-M engine up to 24.5 liters in the Menzi Max 70vk with Mitsubishi 6D16-TLU2B engine, reflecting the significant difference in engine displacement and thermal load between the smallest and largest configurations.
  • The Menzi Max 50vk with Isuzu 4JJ1 engine holds 16.4 liters of coolant, placing the mid-range configuration roughly midway between the 7.8-liter and 24.5-liter figures of the smaller and larger models.
  • A 24.5-liter cooling system capacity, as found in the Menzi Max 70vk, is a substantial volume typical of heavy-duty multi-cylinder diesel engines, where greater coolant mass is needed to manage heat rejection at higher power outputs.
  • All three configurations share a coolant check interval of every 10 hours of operation under normal use conditions, indicating frequent monitoring is expected regardless of engine size.
  • A 10-hour check interval is notably short and consistent with heavy equipment operating in demanding environments, where coolant level and condition can be affected by heat cycling, minor leaks, or pressure fluctuations during regular use.
  • The coolant change interval is set at 24 months across all three configurations under normal use conditions, meaning the replacement schedule is time-based rather than hour-based for all listed models.
  • A time-based change interval of 24 months, rather than an hours-based one, is common when coolant formulations are designed to maintain corrosion inhibitor effectiveness over a calendar period, independent of machine utilization rate.