Ljungby Maskin Waste compactors
Coolant capacity & service interval
Ljungby Maskin Waste compactors utilize coolant with a capacity range of 30 to 52 liters. Service intervals include checks every 10 hours and changes every 24 months. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| C22, Sisu 74 AWI Stage IIIB (2012- ) |
|
| C35, Scania DC13 Stage IIIB (2012- ) |
|
Additional Notes
- The Ljungby Maskin Waste compactors cooling system specifications cover two distinct engine configurations starting from 2012, the C22 with a Sisu 74 AWI Stage IIIB engine and the C35 with a Scania DC13 Stage IIIB engine, each carrying a notably different coolant capacity.
- The C22 Sisu 74 AWI Stage IIIB cooling system holds 30 liters of coolant, a figure that reflects the fill volume for the complete cooling circuit under normal use conditions.
- The C35 Scania DC13 Stage IIIB cooling system carries a substantially larger capacity of 52 liters, which is consistent with the greater engine displacement and thermal management demands of the DC13 platform.
- For the C22 configuration, a coolant level check interval of 10 hours is specified under normal use, indicating a relatively frequent inspection cycle tied to operational demands of the waste compactor application.
- The C22 cooling system also carries a 24-month change interval under normal use conditions, meaning the full coolant replacement is time-based rather than hour-based for scheduled maintenance purposes.
- No check interval or change interval data appears in the C35 Scania DC13 Stage IIIB row, as the specifications for that configuration record only the 52-liter capacity figure.