Liugong Wheeled loaders

Automatic transmission fluid capacity & service interval

Liugong wheeled loaders require automatic transmission fluid with a capacity of 45 liters. Service intervals include checking at 50 hours, changing at 100 hours, and changing at 6 months or 1000 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • CLG835, Cummins 6BT5.9-C125
  • Powershift
  • Use: Normal
  • Capacity 45 liter
  • Check 50 hours
  • Change 6 months/ 1000 hours
  • Code: 2/1
  • CLG835, Cummins 6BT5.9-C125
  • Powershift
  • Use: Initial service
  • Capacity 45 liter
  • Change 100 hours
  • Code: 2/1
  • CLG862, Cummins 6CTA8.3-C240
  • Powershift
  • Use: Normal
  • Capacity 45 liter
  • Check 50 hours
  • Change 6 months/ 1000 hours
  • Code: 4/3
  • CLG862, Cummins 6CTA8.3-C240
  • Powershift
  • Use: Initial service
  • Capacity 45 liter
  • Change 100 hours
  • Code: 4/3

Additional Notes

  • The powershift transmission on the Liugong CLG835 with Cummins 6BT5.9-C125 engine holds 45 liters of automatic transmission fluid, a capacity consistent with a full system service fill for a heavy-duty powershift unit.
  • Under normal use conditions, the CLG835 powershift transmission requires a fluid level check at every 50 hours of operation, reflecting the relatively short inspection interval typical of high-load transmission systems.
  • The normal-use change interval for the CLG835 powershift transmission is set at 6 months or 1000 hours, whichever comes first, applying a dual time-and-hours threshold common in construction equipment service schedules.
  • An initial service change is specified for the CLG835 powershift transmission at 100 hours, a separate and earlier interval than the standard 1000-hour cycle, accounting for the break-in period during which metal particles and contaminants accumulate in new or rebuilt units.
  • The CLG862 with Cummins 6CTA8.3-C240 engine carries the same 45-liter powershift transmission capacity as the CLG835, despite the CLG862 using a larger displacement engine rated at a higher output class.
  • Normal-use service intervals for the CLG862 powershift transmission mirror those of the CLG835 exactly, with a 50-hour check frequency and a 6-month or 1000-hour change interval.
  • The CLG862 powershift transmission also shares the 100-hour initial service change interval with the CLG835, indicating a consistent factory break-in service policy across both wheeled loader configurations.

Other Systems